Eddyfi Ectane 2 Guide de l'utilisateur télécharger pdf (Page 48)

Chapter 6: Maintenance & Troubleshooting Preventive Maintenance

Preventive Maintenance

Due to its design, the Ectane™ requires only minimal maintenance.

Since it has no moving parts, it does not require any preventive maintenance from

the user. Only a regular inspection of the instrument is recommended, to ensure

that it is properly grounded.

Also, Eddyfi strongly recommends an annual calibration and a factory-performed

preventive maintenance by an officially qualified Eddyfi technician.

Cleaning the Instrument

The Ectane external surfaces, that is, the casing and the front panel, can be

cleaned when needed. This section provides the procedure for the appropriate

cleaning of the instrument.

To clean the instrument

1. Make sure the instrument is turned off and the power cord is disconnected.

2. To bring the instrument back to its original finish, clean the casing and the

front panel with a soft cloth.

To get rid of persistent stains, use a damp cloth with a soft soapy solution. Do not

use abrasive products or powerful solvents that might damage the finish.

Wait until the instrument is completely dry before plugging in the power cord and

cables.

WARNING!

Do not clean the instrument with a water jet, spray can, or spray bottle.

Connector contacts could stay wet and produce a short circuit when plugging

cables.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54 55

Pas de commentaire

Eddyfi Ectane 2 Guide de l'utilisateur Page 48